Windham Weaponry WW-15 SRC 7.62 x 39mm AK47 Semi Auto Rifle - Blue/Black, 16" Barrel, 30+1 Rounds, Synthetic, 6-Position Stock

Questions & Answers

• Q: is the 7.62x39 suitable for deer hunting

  • Answered
  • Asked 03/17/2022 15:18 by daniel n

  A:

  Daniel, yes it is suitable for deer hunting. 7.62×39 will reliably kill a deer at 200 yards and black bear at 100 yards. With a scoped bolt-action or AR rifle, it is capable of sub-moa groups with good ammo, and 3-moa groups with steel cased ammo. 7.62×39 is faster and flatter shooting than a 30/30, and has a similar max hunting distance.

  See 2 more answers |
• Q: What is the aol?

  • Answered
  • Asked 03/14/2022 15:10 by Michael G

  A:

  Michael, Overall Length 32.375" Collapsed and 36.125" Extended Sir. Cheers and stay safe!

  See 1 more answer |
• Q: These look like proprietary Mags. What is the cost per Mag? Also what capacities do the come in? Thanks !

  • Answered
  • Asked 12/06/2021 03:00 by marc k

  A:

  About 20 bucks or less per mag. They are available in 30 round and 10 round capacity and both are available and in stock at Buds!! Stay safe and happy plinking!!

  See 1 more answer |
• Q: Do I need special magazines for this or will it accept standard AR-15
  magazines?

  • Answered
  • Asked 11/13/2021 16:19 by david h

  A:

  David, AR Style 7.62x39 listed here are recommended : https://www.budsgunshop.com/product_info.php/products_id/20643/cpd+mag+762x39+30rd+matte+black ----------------- https://www.budsgunshop.com/product_info.php/products_id/20644/c+products+magazines+762x39mm+black+28+round ------------------------ https://www.budsgunshop.com/product_info.php/products_id/713078107/cpd+magazine+ar15+762x39+20rd

  See 2 more answers |
• Q: What size is the buffer tube so I can upgrade butt stock?

  • Answered
  • Asked 11/08/2021 19:33 by Michael D

  A:

  Michael, this is a carbine length milspec buffer tube. Have a great day!

  See 3 more answers |
• Q: Is there a bayonet stud on this weapon

  • Answered
  • Asked 08/15/2021 00:50 by rob h

  A:

  Rob, no bayonet lug on this rifle. Have a great day!

  See 3 more answers |
• Q: Does this rifle use a standard lower that can be swapped out with different uppers?

  • Answered
  • Asked 03/05/2019 19:38 by Kevin J

  A:

  Yes, Kevin, standard AR-15 lower. Standard upper too, but the barrel and bolt are different than standard, to accommodate the 7.63X39 ammo. You can use any standard AR-15 rifle caliber upper on this lower - You will need a different bolt carrier group for some calibers, and they usually come with the uppers in the 'non-223/5.56" caliber uppers. With a bolt and barrel, you could build a 6.5 Grendel on this lower, for example, or a 300 Blackout.

  See 1 more answer |
• Q: Is this gas block considered "low-profile" and will a M-lok handguard fit over the top of it?

  • Answered
  • Asked 08/13/2018 19:29 by Randy W

  A:

  Randy, this is not a "Low Profile" Gas Block as it is the same height for a front sight as the rear receiver Picatinny Rail.
• Q: Will a 9 inch M-Lock handguard cover the gas block on this 7.62x39 carbine?

  • Answered
  • Asked 08/13/2018 17:10 by Randy W

  A:

  9 inch should work fine with this carbine mid-length gas system.

  See 1 more answer |
• Q: I just purchased my SRC 762 AND AM considerung getting sights both hard and optical , red dot etc... , so may I get some recomendations for this weapon?

  • Answered
  • Asked 10/09/2017 17:20 by James D

  A:

  James, I would look into some Mag-Pul flip up BUIS for sights and depending on your budget, a Primary Arms ACSS reticle red dot sight. This is specifically calibrated for the 7.62x39 round and comes in multiple magnifications.

  See 1 more answer |
• Show More Questions